Quantum DAT 432/864 Loader Betriebsanweisung PDF herunterladen (Seite 45)

Configuration for Novell and UNIX Operating System Configuration

Figure 15. Operating System DIP Switches

Configuration for Novell Environment

There are two possible ways to configure the DAT 72 and DDS-4 autoloader to work with the

NetWare native backup application, depending on which tape driver you use.

Configuration 1: If you are using the original Novell NWTAPE driver or any version created before

11/3/99, you must change the Operating System Configuration DIP switches so that switches 5

and 8 are OFF. This is different from their default settings (switches 5 through 8 ON).

Configuration 2: If you use the latest Novell NWTAPE driver (available on the Novell web site), the

Operating System Configuration DIP switches can be left in their default positions (switches 5

through 8 ON).

Configuration for DEC UNIX Environment

DIP Switch Settings

Before using the DAT 72 or DDS-4 autoloader in a DEC UNIX environment, set the operating-system

DIP switches as shown below:

S5 S6 S7 S8 S10

Setting OFFONONONON

Wide/Narrow SCSI

Inquiry String support

Default settings shown

HW data comp

SW data comp

Media recognition system

Power ON self test

Operating system

configuration

switches

1 2 ... 40 41 42 43 44 45 46 47 48 49 50 ... 58 59

Keine Kommentare

Quantum DAT 432/864 Loader Betriebsanweisung Seite 45