Quantum SuperLoader 3 Schnellstart Benutzerhandbuch PDF herunterladen

SuperLoader 3

SuperLoader™ 3

Quick Start Guide

The Quantum

SuperLoader™ 3 is an automated storage and retrieval

device consisting of a tape drive and up to two tape magazines holding up

to eight cartridges each.

For more information, see the Quantum SuperLoader 3 User’s Guide

(PN 81-81317) on the documentation CD provided with your autoloader.

This quick start guide uses the following conventions:

This document explains how to unpack the SuperLoader 3 and install it in a

standard 19-inch rack.

Choosing a Location

The autoloader is designed to fit in a standard 19-inch rack using either the

long or short brackets (depending on the depth of the rack). The autoloader

uses standard rack mounting hardware.

Note: Notes emphasize important information related to the main

topic.

Caution: Cautions indicate potential hazards to equipment and are

included to prevent damage to equipment.

Warning: Warnings indicate potential hazards to personal safety and

are included to prevent injury.

Note: It is recommended that you review this entire document prior to

beginning the installation.

Contents 0

Choosing a Location.......................... 1

Preparing for the Installation........... 2

Providing Necessary Tools ............. 2

Taking ESD Precautions ................. 3

Preparing for Rack Mounting ........ 3

Unpacking the Autoloader................ 4

Checking Accessories ..................... 5

Rack Mounting the Autoloader ........ 6

Autoloader Panel Overviews........... 12

SCSI Bus Requirements ................... 13

General Information..................... 13

Connecting SCSI, SAS, or

Fibre Channel and Power Cables.... 13

Setting the SCSI ID .......................... 16

Preparing the Host and Verifying

the Connection ............................. 16

Operating System Support ............. 17

Autoloader Device Driver............. 17

Tape Drive Device Driver .............. 17

After the Installation....................... 18

1 2 3 4 5 6 ... 17 18

Inhaltsverzeichnis

Seite 1 - Quick Start Guide

SuperLoader 3SuperLoader™ 3Quick Start GuideThe Quantum® SuperLoader™ 3 is an automated storage and retrieval device consisting of a tape drive and up

Seite 2

10 Rack Mounting the AutoloaderSuperLoader™ 3 Quick Start GuideFigure 5 Sliding Autoloader into Rack5 While the other installer holds the front end o

Seite 3

Rack Mounting the Autoloader 11SuperLoader 3Figure 7 Connecting Support Brackets7 Verify that the autoloader is level. Adjust as needed.8 When the au

Seite 4 - Unpacking the Autoloader

12 Autoloader Panel OverviewsSuperLoader™ 3 Quick Start GuideAutoloader Panel OverviewsThe front panel allows you to configure the autoloader, enter c

Seite 5

SCSI Bus Requirements 13SuperLoader 3SCSI Bus RequirementsYou must connect the SCSI autoloader to one of the following SCSI bus types (drive type depe

Seite 6 - Rack Mounting the Autoloader

14 Connecting SCSI, SAS, or Fibre Channel and Power CablesSuperLoader™ 3 Quick Start GuideFigure 10 Cable Connectors (Fibre Channel Tape Drive)Figure

Seite 7

Connecting SCSI, SAS, or Fibre Channel and Power Cables 15SuperLoader 3If the supplied SCSI cable does not fit the connector on your SCSI host adapter

Seite 8 - Brackets

16 Setting the SCSI IDSuperLoader™ 3 Quick Start GuideSetting the SCSI IDEach SCSI device attached to a server or workstation must have a unique SCSI

Seite 9

Windows Operating System Support 17SuperLoader 3• Ensure the autoloader is properly terminated. If the autoloader is the only SCSI device other than t

Seite 10 - Figure 6 Front Alignment

Quantum Corp. (NYSE: QTM) is the leading global storage company specializing in backup, recovery and archive. Combining focused expertise, customer-dr

Seite 11 - SuperLoader 3

2 Preparing for the InstallationSuperLoader™ 3 Quick Start GuideChoose a location that meets the following criteria:Preparing for the InstallationBefo

Seite 12 - Autoloader Panel Overviews

Preparing for the Installation 3SuperLoader 3Taking ESD Precautions 0Some components within the autoloader contain static-sensitive parts. To avoid da

Seite 13 - SCSI Bus Requirements

4 Unpacking the AutoloaderSuperLoader™ 3 Quick Start GuideUnpacking the AutoloaderBefore you begin, clear a desk or table so that you can unpack the a

Seite 14

Unpacking the Autoloader 5SuperLoader 3Checking Accessories 0The following accessories are shipped with the Quantum SuperLoader 3:• Quantum SuperLoade

Seite 15

6 Rack Mounting the AutoloaderSuperLoader™ 3 Quick Start GuideRack Mounting the AutoloaderThis section provides the steps for attaching the autoloader

Seite 16 - Setting the SCSI ID

Rack Mounting the Autoloader 7SuperLoader 3Figure 2 Installing Two Clip Nuts2 Select the long or short autoloader brackets (depending on the depth of

Seite 17

8 Rack Mounting the AutoloaderSuperLoader™ 3 Quick Start GuideFigure 3 Attaching Autoloader Brackets3 Using rack screws, attach a support bracket to

Seite 18 - *81-81313-04 A01*

Rack Mounting the Autoloader 9SuperLoader 3Figure 4 Attaching Support Brackets4 With the help of a second installer, insert the autoloader into the r