Quantum 200D/400D Betriebsanweisung PDF herunterladen (Seite 53)

Troubleshooting and Diagnostics 41

3. Press and hold the Unload button for two seconds to select Test Cartridge & Media. The front panel indicators display

the following:

Indicator State, Character, or Message

Status LED

Amber, solid

Single-character display

c, flashing

LCD

Test Media

Load Scratch Tape

4. Within 60 seconds, insert the suspect cartridge (or the drive will exit Maintenance Mode).

After you insert the cartridge, the front panel indicators display the following:

Indicator State, Character, or Message

Status LED

Amber, solid

Single-character display

e, flashing

LCD

Test Media

Tape Loading ====

while the drive loads the suspect tape, followed by:

Test Media

Locating ====

followed by:

Test Media

Writing ====

followed by:

Test Media

Reading ====

Caution

Data on the suspect cartridge will be overwritten.

The drive will take approximately 15 minutes to run the tests.

If no error is detected, the test will loop and begin again.

5. Press the Unload button. The LTO standalone will rewind and unload the suspect tape. The front panel indicators display

the following, and the LTO standalone exits Maintenance Mode:

Indicator State, Character, or Message

Status LED

Amber, flashing

Single-character display

LCD

Test Media

Tape Unloading

1 2 ... 48 49 50 51 52 53 54 55 56 57 58 ... 64 65

Kommentare zu diesen Handbüchern

Keine Kommentare

Quantum 200D/400D Betriebsanweisung Seite 53

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Leere Datenbänder Quantum 200D/400D