Quantum Sun StorEdge L100 Bedienungsanleitung Seite 73
- Seite / 192
- Inhaltsverzeichnis
- LESEZEICHEN
Bewertet. / 5. Basierend auf Kundenbewertungen
Chapter 3 Changing the Library Configuration
Changing a Tape Drive ID
Sun StorEdge™ L25 Tape Library and Sun StorEdge™ L100 Tape Library User’s Guide 57
To change a tape drive SCSI ID:
1 Access the Configuration screen (see Accessing the
Configuration Screen).
2 Press the Up or Down buttons until the desired drive ID (for
example,
Drive 1 ID) is highlighted.
3 Press Select.
4 Use the Up or Down buttons to select the desired SCSI ID.
Available settings are
0 through 9, A through F, and
Disabled.
5 Press Select.
To return to the
Configuration screen without changing the
option setting, press
Cancel.
6 If desired, repeat steps 2 through 5 to set the SCSI ID for
another tape drive.
7 Press Main to return to the main screen.
Caution: Set the drive SCSI ID to Disabled only if the
drive is not installed in the library.
Caution: If you do not return to the main screen after
changing this setting, your change will not be
saved to NVRAM.
Note: You must reboot the library before this setting will
take effect.
- User’s Guide 1
- Contents 3
- Ta b l e s 12
- Audience 13
- Document 13
- Organization 13
- Preface 14
- Overview 1 17
- SCSI Configuration 1 18
- Library Scalability 1 18
- Chapter 1 Overview 19
- Library Scalability 19
- Table 1 Capacity, L25 19
- Multiple Library Stack 19
- Library Features 1 21
- Library Features 22
- Figure 1 L25 Front 22
- Figure 2 L100 Front 23
- Figure 3 25
- Figure 4 L100 Internal 26
- Back Panel 1 27
- Figure 6 L100 Back 28
- Basic Operations 2 29
- Introduction 2 30
- Stack button (see figure 8) 31
- Level button 32
- GUI Buttons 2 33
- Chapter 2 Basic Operations 34
- Introduction 34
- Table 4 GUI Icons 34
- Figure 12 Quick View 36
- Menu Screen 36
- Quick View Menu screen 37
- Figure 15 Sample 39
- Inventory Screen 39
- Figure 16 Sample 40
- Drive Power Screen 40
- Figure 17 Sample 41
- Moving Tape Cartridges 2 42
- Using the Mailbox 2 46
- Using the Mailbox 47
- Figure 23 Mailbox 48
- OPEN Screen 48
- Removing the Magazines 2 54
- Removing the Magazines 56
- Figure 25 Magazine 56
- Release Button 56
- Figure 26 Release 57
- Magazines Screen 57
- Release latch 60
- Viewing Statistics 2 61
- Press Stats 62
- screen (see figure 31) 62
- Viewing Library 63
- Statistics 63
- Viewing Statistics 64
- Figure 33 Sample 64
- Drive Statistics Screen 64
- Figure 34 Sample 65
- SCSI History Screen 65
- Stack Configuration screen 67
- Changing the Library 69
- Configuration 3 69
- Press Config 70
- screen (see figure 37) 70
- Setting the Library ID 3 71
- Changing a Tape Drive ID 3 72
- Changing a Tape Drive ID 73
- Setting the Time 3 83
- Setting the Date 3 84
- Performing Maintenance 93
- Operations 4 93
- Press Maint 94
- screen (see figure 40) 94
- Cleaning a Tape Drive 4 95
- Cleaning a Tape Drive 96
- Figure 42 Select Tape 96
- Drive Screen 96
- Figure 43 Sample 97
- Figure 44 Drive 98
- Power Screen 98
- Adjusting the Contrast 4 99
- Adjusting the Contrast 100
- Running Diagnostic 101
- Programs 5 101
- Press Diag 102
- The GUI displays the 102
- screen (see figure 47) 102
- Figure 48 Diags: 103
- General Screen 103
- Figure 49 Diag: 104
- Barcode Screen 104
- Running the Move Medium Test 106
- Figure 51 Move 106
- Cartridge TO Screen 106
- Confirm 107
- Figure 54 Diag: 109
- Move-Location Screen 109
- Figure 55 Diag: Move 110
- Location Screen 110
- Running the Display Test 5 111
- Running the Display Test 112
- Running the 113
- Demonstration Programs 6 113
- Figure 56 Demo 114
- Programs Screen 114
- Running the Demo 1 Program 6 115
- Running the Demo 2 Program 6 116
- Running the Demo 3 Program 6 117
- Running the Demo 4 Program 6 118
- Running the Demo 5 Program 6 119
- Running the Demo 6 Program 6 120
- Specifications A 121
- Physical Specifications 1 122
- Performance Specifications 1 123
- Reliability Specifications 1 124
- Tape Drive Specifications 1 125
- Appendix A Specifications 126
- Environmental Specifications 126
- Table 14 Compliance 126
- Fault Symptom Code 127
- (FSC) Dictionary B 127
- DLTtape Cartridge 175
- Maintenance C 175
- When To Visually 176
- Inspect a DLTtape 176
- Cartridge 176
- Figure 59 Write 179
- Protect Switch 179
- Regulatory Statements D 181
- Taiwan Statement 4 182
- Laser Statement 4 183
- Library Battery Statement 4 184
- MC300 Battery Statement 4 184
- Declaration of Conformity 4 185
- Figure 61 Declaration 186
- Glossary 187
Verwandte Produkte und Handbücher für Hardware Quantum Sun StorEdge L100
Hardware Quantum DLT-V4 Bedienungsanleitung
(2 Seiten)
(2 Seiten)
Hardware Quantum Atlas V Bedienungsanleitung
(2 Seiten)
(2 Seiten)
Hardware Quantum 890 USE 155 Bedienungsanleitung
(55 Seiten)
(55 Seiten)
Hardware Quantum Scalar i500 Bedienungsanleitung
(148 Seiten)
(148 Seiten)
Hardware Quantum DLT-S4 Bedienungsanleitung
(22 Seiten)
(22 Seiten)
Hardware Quantum 10K II Bedienungsanleitung
(371 Seiten)
(371 Seiten)
Hardware Quantum QTM300CA Bedienungsanleitung
(12 Seiten)
(12 Seiten)
© 2020, manymanuals.de. Alle Rechte vorbehalten. | 0.763 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Kommentare zu diesen Handbüchern