Quantum DAT 160 Betriebsanweisung PDF herunterladen (Seite 19)

Chapter 1 Introduction

LED Action Sequences

Quantum DAT 320 User’s Guide 4

Figure 2 Front Panel

Components

LED Action Sequences

Table 2 shows the different pattern sequences of the DAT 320 front-

panel LEDs.

Table 2 LED Action Sequences

Clean

LED

(amber)

Tape

LED

(amber

)

Drive

LED

(amber)

Eject

Button

Ready

LED

(green)

Encrypt

LED

(blue)

LED Sequence Cause Action required

All LEDs ON

The drive is resetting or

running self-test.

If LEDs clear in 15 seconds, no action is required.

If they stay on, power cycle the drive.

All LEDs OFF with no

cartridge in the

drive.

This is normal. No action is required.

All LEDs OFF with

cartridge in the

drive.

There may be a problem

with the cartridge or the

tapedrive.

1 Eject the cartridge and load a known-good

cartridge.If the Ready LED remains off, there

may be a problem with the power supply.

2 Check the power cable connection and make

sure the drive is switched on. (On an external

tape drive the Power LED in the enclosure will

be on when power is on.)

3 If the power supply is present and there is still

a problem, power cycle or reset the drive. If it

still fails, call for service.

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 63 64

Kommentare zu diesen Handbüchern

Keine Kommentare

Quantum DAT 160 Betriebsanweisung Seite 19

Kommentare zu diesen Handbüchern