Quantum P1000 Betriebsanweisung PDF herunterladen (Seite 51)

Chapter 2 Installing the P1000 Library

Connecting Host Computers

ATL P1000 Series User’s Guide 35

Connecting Host Computers

You are now ready to connect one or more host computers to the

library. You can connect up to five host computers on separate SCSI

busses.

Note:

If your library is equipped with the Prism FC210 Router, disregard this

section. Instead, see the

ATL PrismFC210 Router Addendum

(PN 6331101).

SCSI Cabling

Guidelines

When connecting the host computer(s) to the library, follow these

guidelines:

•

Connect each host to a SCSI connector on the back panel of the

library.

•

When more than one device is on a SCSI bus, daisy-chain the

devices using the SCSI cables from the accessories kit.

•

Terminate the last device on each SCSI bus.

Using these guidelines, you can set up variations of one-, two-, three-,

four-, or five-host configurations.

Note:

The SCSI cable(s) to the host computer(s) must be supplied by the user.

SCSI Cabling

Examples

This section provides three SCSI cabling examples. Each of these

examples follows the guidelines introduced above.

1 2 ... 46 47 48 49 50 51 52 53 54 55 56 ... 131 132

Keine Kommentare

Quantum P1000 Betriebsanweisung Seite 51