Quantum DAT 240 Loader Bedienungsanleitung PDF herunterladen (Seite 16)

Specifications

Total power consumption for the Scorpion 240 (including both the +5V and +12V

power supplies) is as follows:

Standby Power 11 Watts max

Operating Power 17 Watts typical, 28 Watts max

Surge (start up) 39 Watts max

Note: Surge power and current are measured over a 20-msec period.

The following table lists pin assignments of the power connector for the internal

Scorpion 240.

Pin Assignment

1 +12 VDC

2 +12 return

3 +5 return

4 +5 VDC

Note: The internal Scorpion 240 employs a power sensing circuit that automatically

detects a loss of supply voltage from the host. Temporary loss of supply

voltage or voltage spikes may result in the drive electronics being reset to

their initialized state, but shall under no circumstances result in a loss of

recorded data.

External drive

The external Scorpion 240 has a built-in power supply that senses the incoming

voltage and automatically adapts to voltages within the range of 100 to 240 volts, 50

to 60 Hz. The following table lists its power specifications.

Specification AC Input Voltage

100 (Japan) 120 (US) 240 (European)

AC Input Current 100 milliamps 85 milliamps 170 milliamps

AC Input Power 10.0 watts 10.0 watts 10.0 watts

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 50 51

Keine Kommentare

Quantum DAT 240 Loader Bedienungsanleitung Seite 16