Quantum P1000 Bedienerhandbuch PDF herunterladen (Seite 20)

ATL P1000 Series Library Unpacking Instructions

Document 6221100-02, Ver. 2, Rel. 0

March 1999

20 Installing the Slide Assembly in the Rack

Figure 13 Loosening the

Inner Nuts

Procedure (continued)

When the slide assembly tray is in the desired position, tighten all

inner nuts:

Extend the slide assembly out of the rack until both the

intermediate and inner channels of the slide rails lock (see

figure 12).

This allows you to access the front screws.

Tighten each of the front nuts by holding the nut with an

11/32 inch open-ended wrench and then tightening its

corresponding screw with a Phillips screwdriver.

Press on the inner channel locks to release them (see figure 12).

Push the slide assembly back into the rack until the access hole

on the outside of the inner channel exposes a screw.

Inner nuts

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 31 32

Keine Kommentare

Quantum P1000 Bedienerhandbuch Seite 20