Quantum ATL StackLink Spezifikationen PDF herunterladen (Seite 11)

Quantum|ATL StackLink™ Installation Instructions

Document 6421009-04, Ver. 4, Rel. 0

February 2002

Installing the Carriage/counterweight Assembly 11

Figure 7 Installing the

Carriage/counterweight

Assembly

2 Route the belt connecting the counterweight and carriage up and

over the top of the vertical shuttle assembly, making sure not to

twist the belt.

3 Slide the carriage onto the top of the vertical shuttle assembly,

engaging the guide wheels of the carriage with the vertical rails.

4 Secure the umbilical cable to the underside of the carriage (see

figure 8

a Locate the pin on the underside of the carriage.

b Slide the umbilical cable underneath the open end of the pin.

c Rotate the pin until the umbilical cable is held snugly.

d Tighten the screw to secure the pin.

5 Snap the end of the umbilical chain onto the bottom of the carriage

(see figure 8

Carriage

Counterweight

Belt

Shuttle extrusion

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 27 28

Keine Kommentare

Quantum ATL StackLink Spezifikationen Seite 11