Quantum Scalar i500 Betriebsanweisung PDF herunterladen (Seite 404)

100

101

Chapter 12 Installing, Removing, and Replacing

Replacing the Control Module

Scalar i500 User’s Guide 385

Preparing to Use the

Control Module 12

1 Close the library’s I/E station and access doors.

2 Add the tape drives to the modules. For details, see Adding,

Removing, and Replacing Tape Drives on page 438.

3 Add the power supplies. For details, see Adding, Removing, and

Replacing Power Supplies on page 414.

4 Install the LCB or compact flash card from the removed control

module in the new control module. For details, see R

emoving and

Replacing the Library Control Blade and LCB Compact Flash Card on

page 402.

5 Connect all power cords, network data cables, and module-to-

module cables. Make sure the module terminators are installed in

their previous positions at the top and bottom of the stack of

modules. For cabling instructions, see Cabling the Library

page 289.

6 Power on the library.

7 Re-create and/or modify partitions, cleaning slots, and I/E station

slots as desired.

8 Import tape cartridges into the correct partitions as needed.

9 Save the library configuration (see Saving the Library Configuration

on page 489.

10 If the host application inventories the location of each tape cartridge

in the library, open the host application and reinventory in order to

sync its logical inventory with the physical inventory of the library.

Due to the way the library logically addresses its tape drives and slots

internally, replacing a control module may change the element

addresses, and this can affect proper communication to a controlling

host. See Understanding Logical Element Addressing

on page 35.

Because of this, you must refresh the configuration of any backup

application that manages the library to reflect the adjusted positions.

In addition, you may need to reboot the host server(s) or rescan the

bus to detect the changes.

1 2 ... 399 400 401 402 403 404 405 406 407 408 409 ... 569 570

Kommentare zu diesen Handbüchern

Keine Kommentare

Quantum Scalar i500 Betriebsanweisung Seite 404

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Nein Quantum Scalar i500