Quantum Scalar i6000 Hinweis PDF herunterladen (Seite 6)

Quantum Scalar i6000 Release Notes

6-66883-41 Rev A

June 2015

6 Known Issues

43149 In some instances, during a drive firmware

update and associated drive reboot, a

diagnostic ticket reporting the drive has

been removed may be generated.

The drive should come back online

after the firmware update is

complete and the diagnostic ticket

will auto close. If not, follow the

directions on the diagnostic ticket to

troubleshoot.

50514,

50591

1647282,

1647440

MICA should only inform of multi-initiator

conflicts, not just multi-initiator operation

without reservations.

If multi-initiator operation without

reservations is being reported, you

can filter the diagnostic tickets.

From the GUI, configure the library to

enable diagnostic ticket filtering

(Setup > Notifications > Tickets

Filter).

53329 EEB attached IBM LTO-5 and LTO-6 drives

upgraded to latest drive firmware may

come up in the library in passive mode.

Reboot each drive individually. If that

doesn’t fix the issue, reboot the

library.

51994 When a drive sled is added to a partition it

may not appear in RES data.

Make sure that the robot(s) is

enabled and initialized before

physically adding the drive to the

library.

54091 During a backup, if the drive loses both FC

connections, failover will occur but the

media will not be moved to home slot.

To get the media to return to home

slot from Net back Up (NBU):

1 Select Devices > Robot.

2 Right click.

3 Select Change.

4 Browse to select robot device.

5 Click OK.

6 Click OK.

7 Click OK. Media is then put in it’s

home slot.

51702 During IVT, data pertaining to the drive-

side magazines in the right parking

module is not included in the report.

Make sure that the calibration targets

are located in the correct column and

row.

If calibration targets cannot be in

their proper position because of drive

location, you can move the drives to

different positions in the drive sled.

Change

Request

Number

Service

Request

Number

Description Workaround

1 2 3 4 5 6 7 8 9 10

Kommentare zu diesen Handbüchern

Keine Kommentare