Quantum DAT 160 Betriebsanweisung PDF herunterladen (Seite 29)

Chapter 2 Installing Internal Tape Drives

Attach USB Cable

Quantum DAT 160 User’s Guide 15

Checking to See Whether Your Server Has an Internal USB Port 2

Look at the diagram on the inside of the side panel of the server to

establish whether the server has an internal USB port and its location. The

internal USB port may have a 4-pin or a standard USB connector.

Figure 7 Orientation of Internal

4-pin Connector (Older Style

Pin Layout)

Connecting the USB

Cable to the Server 2

To an Internal USB 2.0 Port

1 Use the schematic on the inside of the server panel to check whether

your server has an internal USB 2.0 port and locate its position.

2 Use the appropriate cable to connect to the server.

• If your server has a 4-pin USB port, you must purchase a special,

4-pin USB cable (see figure 8

). Select the 4-pin cable that is

appropriate for the pin layout on the USB port.

1 2 ... 24 25 26 27 28 29 30 31 32 33 34 ... 81 82

Keine Kommentare

Quantum DAT 160 Betriebsanweisung Seite 29