Quantum DAT 160 Betriebsanweisung PDF herunterladen (Seite 30)

Chapter 2 Installing Internal Tape Drives

Attach USB Cable

Quantum DAT 160 User’s Guide 16

Figure 8 Connecting to a 4-pin

USB Port (Older Style Pin

Layout)

• If your server has a standard USB port, use a standard USB cable.

You can use the supplied standard USB cable and cable ties to

tidy excess cable length.

To an External USB 2.0 Port

Purchase the special USB cable and Cable Routing Kit from Quantum.

The Cable Routing Kit consists of a bracket with attached cable on one

side that connects to the server’s external port and a Type A USB socket

on the other side. Make sure you orientate the bracket correctly when you

fit it (see figure 9

1 Remove a spare blanking plate from the rear panel of the server.

2 Fit the bracket with attached the cable and fix it to the server. Make

sure the cable is outside of the server and connect it to the server’s

external USB port (see figure 9

3 Attach the standard USB cable to the bracket (type A connector) (see

figure 9

). Use the supplied cable ties to tidy up any excess cable.

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 81 82

Keine Kommentare

Quantum DAT 160 Betriebsanweisung Seite 30