Quantum DX5000 Schnellstart Anleitung PDF herunterladen (Seite 4)

DX3000 and DX5000 Quick Start Guide

Figure 4 Rail Hole Pattern

ARNING: If the rack is empty at the time of

installation, do NOT install the DX3000 or

DX5000 chassis too high in the rack. The

weight of the chassis may cause the rack to

become “top heavy” and unstable if installed

in the top of an empty rack.

OTE: Quantum ships sufficient clip nuts to support

mounting the DX3000/DX5000 rack rails and also

to secure the front of the chassis to the rails.

7U of rack space

1 DX3000 System (2U)

1U = 1.75 in

(44.45mm)

1 DX5000 System (5U)

1U = 1.75 in

(44.45mm)

.625 in (15.9 mm)

.5 in (12.7 mm)

.625 in (15.9 mm)

Top of rack

.312 in (7.92 mm)

.5 in (12.7 mm)

Hole pattern

The marks above (X)

indicate the location of

mounting hardware on

the rack rails. Ensure that

any necessary mounting

hardware is installed on

the rack rails prior to

installing the chassis.

Clip nut

Installing the DX3000/

DX5000 Chassis 0

1 Assemble the DX3000/DX5000 support brackets

figure 5

• For the DX5000 - The DX5000 rails are preset for

easy installation. Loosen the two nuts securing the

back portion of the rail so the rail can adjust to the

depth of the rack.

• For the DX3000 - The DX3000 rails are preset for

28 in (71.1cm). Loosen the nuts to adjust the rails

to the depth of the rack.

OTE: Two sizes of support brackets are included

with the DX3000 rails to support various rack

depths. Measure the depth of the rack to

determine the depth. The short brackets (5

in., 12.7cm) are used for rack depths of 28 to

31 in (71.1 to 78.7 cm). The long brackets

(10 in., 25.4 cm) are used for rack depths of

32 to 36 in (81.3 to 91.4 cm). Use the

appropriate support bracket for your rack.

1 2 3 4 5 6 7 8 9 10 11

Kommentare zu diesen Handbüchern

Keine Kommentare

Quantum DX5000 Schnellstart Anleitung Seite 4

Kommentare zu diesen Handbüchern