Quantum DX5000 Schnellstart Anleitung PDF herunterladen (Seite 5)

DX3000 and DX5000 Quick Start Guide

Figure 5 Assembling the Rack

Rails

2 Install the left and right chassis support brackets at the

beginning of a hole pattern (see Locating the Mounting

Position) and secure as follows (see figure 6):

• DX3000 - One 10-32 x .50 in. Slotted screw with

and a three hole nut plate on each rail at the front

and back of the rack. 10-32 x .50 in. PHILLIPS

screws and nuts are also provided for racks with

threaded holes.

NOTE: The support brackets extend to accommodate

rack depths or 30 to 36 in. (76.2 to 91.4 cm).

NOTE: The DX3000 support brackets must be installed

on the inside rack rails.

DX3000: The brackets are

secured with four #8 PHILLIPS

screws and four nuts.

DX3000: Bracket (short

brackets pre installed)

DX5000: Adjustment

screws; adjusts to

the depth of your

rack

DX5000: Front mounting

bracket preset. Ensure the

screws are in the correct

position.

• DX5000 - Two 10-32 x .50 in. PHILLIPS screws on

each rail at the front and back of the rack for the

DX5000.

Figure 6 Installing the Chassis

Support Brackets (DX3000 and

DX5000)

3 Once the rails are secured to the rack, tighten the rail

adjustment nuts on each rail.

4 With the support brackets installed, prepare the chassis

mounting holes if necessary (see figure 7

for hole

location). These are the holes used to secure the chassis

to the rack.

OTE: Ensure that clip nuts are installed on the rails (see

figure 4

) prior to installing the DX5000 rails.

DX5000

support

brackets

DX3000

support

brackets

10-32 x .50

PHILLIPS

screws

Clip nuts

Three hole nu

plate, use

bottom hole

10-32 x .50

slotted

screw

1 2 3 4 5 6 7 8 9 10 11

Kommentare zu diesen Handbüchern

Keine Kommentare

Quantum DX5000 Schnellstart Anleitung Seite 5

Kommentare zu diesen Handbüchern