Quantum QVNR Bedienungsanleitung PDF herunterladen (Seite 24)

QNVR Installation Manual V1.2

QNVR installation and user manual

① Multiscreen Display : Changing the display mode

② PTZ Camera Selection

③ Set Preset

④ Call Preset

⑤ PTZ Mode : The PTZ mode is toggled between Pan/Tilt and Zoom/Focus mode whenever

this button is pressed.

⑥ Pan Left / Focus Near

⑦ Pan Right / Focus Far

⑧ Tilt Up / Zoom In

⑨ Tilt Down / Zoom Out

[ Camera selection ]

The PTZ cameras can be controlled in either full screen or split screen mode.

If in split screen mode press the PTZ Camera Selection button(②), the PTZ camera icon

will step from one camera to the next on the split screen.

[ Pan and Tilt control ]

Press the PTZ Mode button(⑤) to enter the Pan/Tilt mode.

To move the dome use the arrows buttons;

Left(⑥) : Pan left, Right(⑦) : Pan right, Up(⑧) : Tilt up, Down(⑨) : Tilt down

[ Zoom and Focus control ]

Press the PTZ Mode button(⑤) to enter the Zoom/Focus mode.

To zoom or focus use the arrows buttons;

Left(⑥) : Focus near, Right(⑦) : Focus far, Up(⑧) : Zoom in, Down(⑨) : Zoom out

[ Preset positions ]

1. To store a preset position, move the camera to the required position.

2. Press the Set Preset button(③), the popup window will appear.

3. Enter the preset number to be stored then press OK.

[ Call Preset ]

1. To recall a preset position press the Call Preset button(④), the popup window will appear.

2. Enter the preset number you want then press OK.

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 90 91

Keine Kommentare

Quantum QVNR Bedienungsanleitung Seite 24