Quantum QVNR Bedienungsanleitung PDF herunterladen (Seite 51)

QNVR Installation Manual V1.2

QNVR installation and user manual

5-3. Beep Out

The buzzer can be set to sound on the following occurrences: Video Loss; Alarm input;

Motion detection; Power Loss; Smart (Hard disk monitoring).

The duration of the beep can be set.

5-4. Alarm Out

The Alarm out relay can be set to activate on the following occurrences: Video Loss; Alarm

input; Motion detection; Power Loss; Smart (Hard disk monitoring).

The duration of the activation can be set.

Relay Follower

A relay can be set to close each time a camera is selected.

This relay closure can be used as the Alarm input to a switcher, such as the VS042A. If the

Monitor outputs from several DVRs are taken to the inputs of this switcher, then each time a

camera is selected, the switcher will change it’s output to the relevant DVR monitor picture.

This allows the full screen images of several DVRs to be viewed on a single monitor.

Relay Control

Normal = Relay will close when an alarm activation is received

On = Relay permanently active

Off = Relay not active

1 2 ... 46 47 48 49 50 51 52 53 54 55 56 ... 90 91

Keine Kommentare

Quantum QVNR Bedienungsanleitung Seite 51