Quantum DAT 432/864 Loader Betriebsanweisung PDF herunterladen (Seite 38)

Understanding the Drive LEDs LED Summary

Eject Button

You can use the Eject button to eject the magazine or to unload a cartridge from the drive. After

pressing the Eject button, you must press the Enter button to confirm your request.

Select Button

You can use the Select button to select individual cartridges by their slot numbers (1 through 6), to

scroll through items from menus on the LCD display, and to access loader menus if no magazine is

installed.

Enter Button

You can use the Enter button to select specific items from menus on the LCD display, to load a

cartridge into the autoloader (after you have selected the cartridge using the Select button), or to

confirm that you want to eject the magazine when there is a cartridge in the autoloader

LED Summary

The following table summarizes the actions of the front-panel LEDs.

Table 7. LED Quick Summary

LED Color Action Description

Clean Green ON (Lit) Cleaning is required because the autoloader has been

operating for at least 25 hours (DDS-2) or 50 hours

(DDS-3, DDS-4, or DAT 72).

Slow Flashing Internal error rate threshold has been exceeded and

cleaning is required.

Flashing Cleaning cartridge in the drive has exceeded its useful

life. Replace the old cleaning cartridge with a new one.

Media Green ON (Lit) An inserted cartridge is operating properly.

Flashing Drive could not write the tape correctly (write error).

Use a DDS cleaning cartridge to clean the drive.

Drive Amber ON (Lit) Drive is reading or writing the tape normally.

Rapid Flashing A hardware fault has occurred.

1 2 ... 33 34 35 36 37 38 39 40 41 42 43 ... 58 59

Keine Kommentare

Quantum DAT 432/864 Loader Betriebsanweisung Seite 38