Quantum DLT 8000 Betriebsanweisung PDF herunterladen (Seite 58)

HP Ultrium Drives & Media

Using HP Ultrium Cartridges

Chapter 44-6

CAUTION Do not bulk erase Ultrium formatted cartridges. This will destroy pre-

recorded servo information and make the cartridges unusable.

Write-Protecting Ultrium Cartridges

Each cartridge has a sliding write-protect switch. Using the write-protect

switch ensures data safety for files that have been previously written to

tape, preventing additional files from being written to that tape.

To change the write-protect setting, slide the red tab on the base of the

cartridge (Figure 4-2 on page 4-6):

• Right to prevent data from being written to the cartridge. The red tab

on the cartridge displays a padlock when the write-protect switch is

in the “ON” position.

• Left to allow data to be written to the cartridge (unless the tape is

write-protected electronically through your backup software). The

padlock on the red tab cannot be seen and the hole is exposed when

the write-protect switch is in the “OFF” position.

NOTE With the write-protect switch in either position, data can be read from the

cartridge.

Figure 4-2 Ultrium Write-Protect Button Settings

1 2 ... 53 54 55 56 57 58 59 60 61 62 63 ... 68 69

Keine Kommentare

Quantum DLT 8000 Betriebsanweisung Seite 58