
SDLT 220 and SDLT 320 Product Manual CHAPTER 4: Installing Your Tape Drive
81-85002-01 March 2004 4-13
2. Using four #6-32 UNC-2B screws, secure the tape drive in the bay or chassis.
Figure 4-5. Internal Drive Mounting Locations – Side and Bottom Views
Connecting the Internal Drive Cables
The three connectors on the back of the internal SDLT drive that are discussed in
this section are: 1) SCSI, 2) power, and 3) optional library/loader connectors. For
the tabletop model, typical connectors (power cords) are shown in Figure 4-8 on
page 4-24.
SCSI and Power Connectors
Figure 4-6 on page 4-15 shows the pin orientation for the 68-pin SCSI connector
and 4-pin power connector located on the back of the internal tape drive.
Kommentare zu diesen Handbüchern