Quantum Q100T Bedienungsanleitung PDF herunterladen (Seite 6)

2.5 Displays and legends (Figure 4)

The legends on the display face are given in the following table:

LEGEND

CHARACTER HEIGHT

This Sale

Litres

Pence per litre

See that indicator is at zero before

delivery commences

Minimum delivery 2 litres

18mm

15 mm

5 mm

Legends associated with grade indication are 5 mm high and there is an illuminated pump

number 80 mm high. Additionally, there may be the following typical instructions adjacent to

the display face:

1 Remove fuel tank filler cap

2 Place nozzle in fuel tank

3 Squeeze trigger until required quantity is indicated or delivery stops automatically

4 Replace nozzle in holster

5 Replace fuel tank filler cap

6 Check indication and pay cashier.

2.6 Sealing (Figure 5)

2.6.1 Meter

The meter is sealed by means of a wire passed through a hole in the rim of the calibration

wheel, a hole in the locking pin and a hole in the head of a bolt securing the cover of the

calibrating cylinder. A wire passes through two bolt heads in each cylinder cover, one bolt

head in both the top and bottom meter covers and a hole in the dispenser frame.

2.6.2 Pulser

An adapter is fitted between the meter output shaft and the pulser shaft. A screw fixes the

adapter to the meter shaft and a further screw fixes the adapter to the pulser shaft. Each screw

head has a hole through which a sealing wire is passed, drawn taut, and then sealed.

3 OPERATION

3.1 Controls and features

On the underside of the computing and display head is a key switch. The operation of this key

switch allows the infra-red remote control access to the management programming mode once

a PIN number has been entered via the remote control.

1 2 3 4 5 6 7 8 9 10 11 ... 76 77

Keine Kommentare

Quantum Q100T Bedienungsanleitung Seite 6