9
4.2.4 Pegasus
As described in the certificate but having the Pegasus housing as shown in Figure 9
4.2.5 Optima
As described in the Certificate but having the Optima dispenser housing as shown in Figure 10.
The calculator housing on Optima has an outside cladding of steel and is in halves. Each of
which may be opened for access to the calculator, An additional smaller hydraulic housing is
positioned on the opposite side of the hose retraction units in some configurations of hose
dispensing units.
4.2.6 Quantium 100, 300 and 500
As described in the Certificate but having a range of dispenser housings under the generic
name of Quantium. These are built using the same standard sub assemblies but with different
hose and product combinations.
4.2.6.1 Quantium 100 (Figure 11)
The calculator housing of the Quantium 100 is situated between two columns 340mm above
the hydraulic housing. The dispenser columns and hydraulic housing are steel sheet punched
and folded into modular units. Hoses are hung from either, spring actuated rope retraction
units, or stowed on a simple hook. Nozzle holders are in the columns (island) configuration.
4.2.6.2 Quantium 300 (Figure 12)
The calculator housing of the Quantium 300 is situated between two columns 340mm above
the hydraulic housing. The dispenser columns and hydraulic housing are steel sheet punched
and folded into modular units. Hoses are hung from either fixed or flexible hose masts. The
nozzle holders may be either in the hydraulic housing doors or in the columns.
4.2.6.3 Quantium 500 (Figures 13)
The calculator housing of the Quantium 500 is situated partially on the hose cassettes and on a
blanking unit for a future card reader, adjacent to the calculator housing is a space fill unit for
advertising. The card reader is situated above the hydraulic housing containing the solenoid
housing, this housing is situated above an extended hydraulic housing that is adjacent to the
cassettes.
4.2.7 Quantium 300T, 400T and 500T
As described in the certificate but having a range of dispenser housings under the generic name
of Quantium T. These are built using the same standard sub assemblies but with different hose
and product combinations.
4.2.7.1 Quantium 300T model (Figure 14)
Having the Quantium 300 dispenser as described above modified with minor dimensional and
cosmetic changes. This is primarily a change in footprint from 750mm x 500mm to 830mm x
520mm. The model is identified as the Quantium 300T.
(98 Seiten)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Kommentare zu diesen Handbüchern