Quantum Qflash X4d Betriebsanleitung PDF herunterladen (Seite 6)

3.4 Bracket Mounting

Qflash mounts with a 1/4-20 standard tripod thread to

brackets, light stands, and tripods. Many brackets

are made especially for Qflash by the popular

bracket manufacturers.

Quantum also has two optional brackets, mod-

els QF70US and QF70E. The instructions

below that describe mounting to

both of these brackets applies

also to other brackets, light

stands, and tripods.

Two types of 1/4-20 fasten-

ers and a friction pad are sup-

plied with Qflash. Place the

mounting pad between Qflash

and the bracket, insert one of

the fasteners and tighten. (If

the mounting surface has a

pad, the mounting pad is not

necessary). Note that brackets

vary in thickness. Always make sure

that the mounting knob screws into Qflash

at least two complete turns.

3.5 Connecting Qflash to a Camera

There are several ways to connect a Qflash to a camera, both wired and

wireless.

For wired connection use 1) a household two-prong sync cord (supplied)

to the sync connector of Qflash; 2) a QF or FW series TTL adapter; 3) Use

a D series QTTL adapter; or 4) use a QF53 Hot Shoe sync. Consult your

dealer or www.qtm.com for the latest TTL and QTTL adapter models.

Note: When using a household type two-prong cord, if you have difficulty

getting the sync signal to the flash, reverse the plug to match the camera’s

sync polarity.

3.6 Powering Qflash

Before turning on any power to Qflash always make all electrical connec-

tions first, both to the camera and to Turbo Batteries.

Plug the Qflash T4d cable into the output jack of any Quantum Turbo

Battery. For Qflash X4d, connect the power cable to a Qpaq system*.

Turn on Turbo or Qpaq power. Qflash will be powered up and ready to run.

If a “Check Turbo” or “Check Power” message appears on the Qflash dis-

play, turn off the Turbo or Qpaq, wait one second, and turn it on again. If

the message appears again, the power pack needs recharging.

If a “Reset Flash?” message appears in the Qflash display press any but-

ton, except the Mode I button, to resume operation.

1 2 3 4 5 6 7 8 9 10 11 ... 43 44

Kommentare zu diesen Handbüchern

Keine Kommentare

Quantum Qflash X4d Betriebsanleitung Seite 6

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Taschenlampen Quantum Qflash X4d