
Pathlight VX User’s Guide 19
Shutting Down the Pathlight VX
Shutting down the Pathlight VX consists of two tasks:
• Shutting Down the System Software and the MS
• Shutting Down the Hardware on page 21
Shutting Down the System Software and the MS
Use this procedure to shut down the system software and the MS.
1 Log on the MS.
Refer to Virtual Library Summary
on page 27.
2 On the Pathlight VX Home page, select Operations→ System Shutdown.
CAUTION
Rebooting the Pathlight VX causes access to virtual libraries to be
interrupted.
Note
To shut down the Pathlight VX, you must be a user with Administrator
privileges.
Note
Note the following before shutting down the Pathlight VX:
• The SNC does not have power buttons. Each SNC uses either 1 or 2 power cords.
The power is controlled by plugging each power cord either in or out of an AC
power source.
• If the DPEs or DAEs do not have power buttons, the power is controlled by
plugging each power cord either in or out of an AC power source.
System
Shutdown
Kommentare zu diesen Handbüchern