
Appendix C DLTtape Cartridge Maintenance
Visual Inspection of DLTtape Cartridges
164 ATL M-Series User’s Guide
b Swing the door open.
Figure 62 Opening
the Tape Cartridge
Door
7 Verify that:
• The tape is wound tightly on the reel
• The tape leader loop is sticking up about an eighth of an inch
• The tape leader loop is not bent or torn
8 Check for proper operation of the tape cartridge’s write-protect
switch (see figure 63
).
The switch should snap back and forth, and the orange tab should be
visible when the switch is in the write-protected position.
Caution: If any of the above conditions are not met, do not use
the cartridge.
Tape
cartridge
door
Tab
Kommentare zu diesen Handbüchern