Quantum P3000 Betriebsanweisung PDF herunterladen (Seite 60)

Chapter 2 Basic Library Operations

Manually Ejecting a Tape Cartridge

40 Quantum|ATL P3000 Series User’s Guide

Manually Ejecting a Tape Cartridge

DLT Tape Drives

To manually eject a tape cartridge from a DLT tape drives:

Open one or both of the library front doors:

Press the Standby button on the GUI. This places the library

off-line.

Verify that the display state display reads System Off-line

and that the robotics has stopped moving. The off-line state

does not take effect until current commands are completed.

Take electrostatic discharge precautions as explained in

Taking ESD Precautions

on page 16.

Using the key from the accessories kit, unlock each door.

Lift each door handle straight up and then turn the handle

counterclockwise to unlatch each door.

Gently pull on each door handle to open the door.

Press the Unload button on the drive (see figure 21).

When you press Unload, the tape cartridge rewinds. This may

take between 10 to 120 seconds. When the rewind process is

completed, the Operate Handle indicator comes on.

Figure 21 DLT Tape

Drive Front Bezel

(Example)

Unload button

Insert/release

handle

(shown in up position)

1 2 ... 55 56 57 58 59 60 61 62 63 64 65 ... 145 146

Keine Kommentare

Quantum P3000 Betriebsanweisung Seite 60