Quantum P3000 Betriebsanweisung PDF herunterladen (Seite 61)

Chapter 2 Basic Library Operations

Manually Ejecting a Tape Cartridge

Quantum|ATL P3000 Series User’s Guide 41

When the Operate Handle indicator comes on, raise the insert/

release handle to eject the tape cartridge.

Pull the tape cartridge completely out of the drive.

Close and lock the library doors.

Quantum SDLT

and IBM Ultrium

LTO Tape Drives

To manually eject a tape cartridge from Quantum SDLT and IBM

Ultrium LTO T200 tape drives:

Refer to Steps 1a-1f under DLT Tape Drives on page 40.

Press the Unload button on the drive. The Unload button

works the same as a soft eject (VCR-style) button.

Note:

Place your finger approximately 1/4 of an inch in

front of the drive’s cartridge opening to ensure that

the cartridge does not drop when ejected.

Caution:

Pause for at least 3 seconds, then grasp the tape

cartridge and slowly pull it half way out of the

drive.

Caution:

If the tape cartridge leader failed to detach from

the take-up leader, push the tape cartridge all of

the way back into the drive, press down the

insert/release handle, and return to step 2.

Otherwise, continue to step 5.

1 2 ... 56 57 58 59 60 61 62 63 64 65 66 ... 145 146

Keine Kommentare

Quantum P3000 Betriebsanweisung Seite 61