Quantum Scalar 24 Spezifikationen PDF herunterladen (Seite 77)

Scalar 24 Installation and Operation Guide 69

15 Press and then to accept the

changes and move to the next option.

16 Press and to select the mode for

Partition 2.

LTO

• Sequential: Requires the backup software

write the data to each of the tape cartridges

sequentially, starting with the first one. This

mode is used if your host only recognizes

tape drives and not libraries.

• LUN: Allows the host backup software to

access the library on a different logical unit

than the drives.

SDLT

• Sequential: (see description above)

17 Press and then to accept the

changes and move to the next option.

18 Press and to set the SCSI ID of the

Library.

You must choose a number between 0 and 7.

Recommended: 0

19 Press and then to accept the

changes and move to the next option.

20 Press and to set the SCSI ID for

Drive 1.

You must choose a number between 0 and

15.

Recommended: 1

21 Press and then to accept the

changes and move to the next option.

22 Press and to set the SCSI ID for

Drive 2, if applicable.

You must choose a number between 0 and 15.

Recommended: 2

23 Press and then to accept the

changes and move to the next option.

Selection Description/Result

1 2 ... 72 73 74 75 76 77 78 79 80 81 82 ... 153 154

Keine Kommentare

Quantum Scalar 24 Spezifikationen Seite 77