Quantum DLT-V4 Bedienungsanleitung PDF herunterladen (Seite 39)

DLT-V4 Product Manual 23

Chapter 4

4Installing the Internal

SATA-to-USB Tape Drive

This chapter contains step-by-step instructions for installing the DLT-V4

internal SATA tape drive with USB adapter.

The internal SATA-to-USB tape drive attaches to the server through a

USB adapter. The SATA-to-USB tape drive is the same as the SATA tape

drive but uses a special SATA-to-USB adapter to connect to the USB port

on your PC’s motherboard or host bus adapter.

Equipment Required 4

To install the DLT-V4 internal SATA-to-USB tape drive, you need a

PHILLIPS® screwdriver and adequate ESD protection.

You also need the SATA-to-USB adapter (provided in your accessories

kit) in order to install the tape drive correctly. The adapter kit is also

available at

www.quantum.com (part name: Quantum USB 2.0 to SATA

Direct-Connect Motherboard Adapter; part number: CNU-UA1100MA).

1 2 ... 34 35 36 37 38 39 40 41 42 43 44 ... 96 97

Keine Kommentare

Quantum DLT-V4 Bedienungsanleitung Seite 39