Quantum DLT-V4 Bedienungsanleitung PDF herunterladen (Seite 76)

Chapter 9 Using Data and Cleaning Cartridges

Unloading a Data Cartridge

DLT-V4 Product Manual 60

Unloading a Data Cartridge 9

To unload a data cartridge from your tape drive, follow these steps:

1 Press the Unload/Eject button or use your tape backup software to

unload the data cartridge. The

Ready LED blinks while the tape drive

rewinds the tape.

2 When the tape drive has rewound the tape, it ejects the data

cartridge, as shown in figure 25

Figure 25 Unloading a DLTtape

VS1 Data Cartridge from the

Tape Drive

Remove the data cartridge from the tape drive.

4 Return the data cartridge to its plastic storage case to prolong data

cartridge life.

Caution: Remove the data cartridge from your tape drive before

powering off the tape drive—or the server or workstation

for an internal tape drive. Leaving a data cartridge in the

tape drive when power is off can result in data cartridge

and tape drive damage and may cause data loss because

the header/catalog data may not be properly written

before the tape drive loses power.

1 2 ... 71 72 73 74 75 76 77 78 79 80 81 ... 96 97

Keine Kommentare

Quantum DLT-V4 Bedienungsanleitung Seite 76