Quantum DLT-V4 Bedienungsanleitung PDF herunterladen (Seite 40)

Chapter 4 Installing the Internal SATA-to-USB Tape Drive

USB Requirements

DLT-V4 Product Manual 24

USB Requirements 4

The tape drive must be connected to a USB 2.0 port.

Installation Steps 4

To install the tape drive, perform the following tasks in this order. Follow

the detailed instructions on the pages listed below.

Table 4 Installing the DLT-V4

Internal SATA-to-USB Tape

Drive

Step Instruction Page

1 Unpack and check the tape drive for shipping

damage.

Page 25

2 Select a server or workstation that is to host

the tape drive.

Page 25

3 Download and install the current device

driver (if required) (see chapter 7, Installing

the Device Drivers).

Page 48

4 Install the tape drive in the server or

workstation. Connect the power and data

cables to the tape drive.

Page 25

5 Connect the SATA data cable to the SATA-to-

USB adapter. Connect the SATA-to-USB

adapter to the host PC motherboard or USB

HBA.

Page 28

6 Complete the installation by securing the tape

drive in the host server or workstation and

turning on power.

Page 30

7 Confirm the installation. Page 32

1 2 ... 35 36 37 38 39 40 41 42 43 44 45 ... 96 97

Keine Kommentare

Quantum DLT-V4 Bedienungsanleitung Seite 40