Quantum P2000 Betriebsanweisung Seite 110
- Seite / 146
- Inhaltsverzeichnis
- LESEZEICHEN
Bewertet. / 5. Basierend auf Kundenbewertungen
Appendix B Relocating the Library
Crating the Library
90 ATL P2000 Series Automated Tape Library User’s Guide
Crating the Library
2
Use this section:
•
If you need to ship the library to the new site.
•
If you need to transport the library by forklift or similar means.
If you are moving the library within a facility, refer to “
Preparing
the Library for Operation” on page 93.
Crating the Library
2
To crate the library for a new site:
1
Prepare the shipping pallet for the library as shown in
figure 52
.
a
Attach the two ramp extensions to the pallet.
b
Place the wooden support bar underneath the ramp
extensions.
c
Verify that the left wooden bar is attached to the pallet.
2
Place the library on the pallet
a
Raise the library support feet.
b
With the help of at least one person, roll the library to a
position in front of the pallet ramp.
c
Roll the library onto the pallet.
3
Secure the library.
a
Place the shipping bag over the library, and secure it into
place.
Warning:
The library weighs approximately 985 pounds (447
kg). Use at least two people to perform any steps that
involve lifting or guiding the library. Use safe
practices when lifting or guiding the library and
handling the ramp.
- User’s Guide 1
- Contents 3
- Index 121 7
- Audience 0 15
- Purpose 0 15
- Document 15
- Organization 15
- Notational 16
- Conventions 16
- Customer Support 19
- Library Description 21
- Element 23
- Numbering 23
- Convention 23
- DLT and/or 24
- DLT and/or SDLT 25
- DLT and/or LTO 25
- Features and Benefits 27
- Library Components 28
- Front Panel 29
- Cabinet-Back 30
- Figure 5 Cabinet 31
- Back Panel 31
- Touch Screen 32
- IntelliGrip 33
- Media Cartridge 33
- Handling 33
- Mechanism 33
- Load Port and 35
- Magazines 35
- Basic Library Operations 37
- Taking ESD 38
- Precautions 38
- DLT/SDLT 39
- Labeling 39
- A F L 0 5 3 40
- DLTtape IV 40
- A B C 1 2 3 L 1 41
- Closing the 42
- Library Doors and 42
- Access Panels 42
- Connecting Host 42
- Workstations 42
- SCSI Distribution Assembly 43
- Robotics Backplane 43
- Drive Column 1 43
- SCSI Diff. Terminator 43
- Using the Touch Screen GUI 46
- PRODUCTS 47
- Table 5 Touch 48
- Screen GUI Functions 48
- Library Status 49
- Information 49
- Exiting a Screen 49
- Obtaining Library Status 51
- Overview Screen 52
- Activity 53
- Tapes Screen 54
- Securing the Touch 56
- Screen GUI 56
- Changing Security Levels 56
- Operating the Load Port 58
- Load port 60
- Inserting LTO Tape 61
- DLT Tape Drives 62
- Tape Drives 63
- Quantun SDLT and 63
- IBM Ultrium LTO 63
- Operator Commands 65
- Opening the Operator Screen 66
- Configuring the Library 67
- Configure 68
- Configuring Library Options 69
- Configuring a 70
- Library Option 70
- Performing an Inventory 71
- Moving Cartridges 72
- Unloading a Drive 74
- Unloading the Load Port 75
- Chapter 3 Operator Commands 76
- Service Commands 77
- Opening the Service Screen 78
- Changing Passwords 79
- Generating Reports 80
- Chapter 4 Service Commands 81
- Figure 34 Service 81
- Screen - Reports 81
- Figure 36 82
- Performing a 84
- System Test 84
- Executing Either 86
- Multi-Unit Commands 87
- Multi-Unit 91
- Calibrate 91
- All PTMs 91
- Library Specifications 93
- Physical Characteristics 94
- Table 8 Interfaces 94
- Environmental Specifications 100
- Relocating the Library 101
- Removing Tape 102
- Cartridges 102
- Installing Shipping 103
- Restraints and 103
- Horizontal 105
- Gripper restraint 106
- Follower guide 106
- Gripper assembly 106
- Load Port 108
- Shipping Plate 108
- Disconnecting 108
- Library Cables 108
- Figure 51 Inserting 109
- Crating the Library 110
- Automatic Drive Cleaning 115
- Selection of Cleaning Mode 116
- Reporting of Cleaning Mode 117
- Mode Sense 118
- Command 118
- Cleaning Cartridges 119
- Monitoring Usage 120
- Monitoring the Drives 121
- Media Movement to the Drive 122
- Media Movement from the Drive 123
- Unloading Cleaning Cartridges 124
- Laser Regulations 125
- Exposure Warning 126
- Regulatory Statements 127
- LASER STATEMENT 129
- BATTERY STATEMENT 131
- Glossary 133
Verwandte Produkte und Handbücher für Bandlaufwerke Quantum P2000
Bandlaufwerke Quantum DLT-S4 Betriebsanweisung
(386 Seiten)
(386 Seiten)
Bandlaufwerke Quantum Scalar 24 Betriebsanweisung
(160 Seiten)
(160 Seiten)
Bandlaufwerke Quantum DAT 24 Drive Betriebsanweisung
(181 Seiten)
(181 Seiten)
Bandlaufwerke Quantum DLT-V4 Bedienungsanleitung
(97 Seiten)
(97 Seiten)
Bandlaufwerke Quantum SDLT 320 Bedienungsanleitung
(150 Seiten)
(150 Seiten)
Bandlaufwerke Quantum DLT2700xt Bedienungsanleitung
(345 Seiten)
(345 Seiten)
Bandlaufwerke Quantum L500 Betriebsanweisung
(120 Seiten)
(120 Seiten)
Bandlaufwerke Quantum DLT4500 Bedienungsanleitung
(360 Seiten)
(360 Seiten)
Bandlaufwerke Quantum DLT-V4 Bedienungsanleitung
(62 Seiten)
(62 Seiten)
Bandlaufwerke Quantum Scalar i6000 Betriebsanweisung
(106 Seiten)
(106 Seiten)
Bandlaufwerke Quantum TC-L32AX-EY Datenblatt
(2 Seiten)
(2 Seiten)
© 2020, manymanuals.de. Alle Rechte vorbehalten. | 0.090 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Kommentare zu diesen Handbüchern