Quantum SuperLoader 3 Bedienungsanleitung PDF herunterladen (Seite 12)

12 Tape Removal - Removing Top Cover

SuperLoader 3 Stuck Tape Removal Instructions

Figure 13 Removing the Back

Cover Screws

T8 Torx screws (2)

6 Grasp the lower front corner of the top cover. (see Figure 14). Pull slightly outward

to disengage the top cover from the chassis base. Simultaneously, lift the rear corner

out and up until the cover is loose and can be removed as shown in Figure 15.

Figure 14 Disengaging the Top

Cover

Note: The top cover removal can also be accomplished by lifting the opposite side

of top cover after all screws are removed from the top cover.

WARNING: The top cover edges are sharp. Use caution when handling.

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 18

Keine Kommentare

Quantum SuperLoader 3 Bedienungsanleitung Seite 12