
Chapter 2 Installation Procedures
Installing the Internal LTO-3 Half-Height Tape Drive
LTO-3 Half-Height Tape Drive User’s Guide 13
Figure 3 Internal Parallel SCSI
Bus Termination Examples
Mounting the Internal
Tape Drive 2
You can mount the internal LTO-3 Half-Height Tape Drive either
horizontally or vertically, but not upside down (see figure 4
).
IF you mount the drive . . . THEN the . . .
horizontally, base of the drive must be within 15
degrees of horizontal.
vertically, side of the drive should be within 5
degrees of horizontal.
Tap e d ri ve
(no termination)
SCSI device
(termination
disabled)
SCSI controller
(termination
enabled)
SCSI device
(termination
enabled)
Tape drive
(no termination)
SCSI controller
(termination
enabled)
SCSI terminator
SCSI terminator
Kommentare zu diesen Handbüchern