Quantum ValueLoader Bedienungsanleitung PDF herunterladen (Seite 35)

Operating the ValueLoader

Operator’s Panel Overview

ValueLoader DLT VS80/DLT VS160 Tape Autoloader User Manual 21

These errors can be caused by faulty or improperly degaussed media,

media that has been previously written in an invalid format such as

DLT7000 or DLT8000, or dirty read/write heads in the tape drive. The

Media Attention LED is also be illuminated (see LED Indicators

page 22). Exporting the indicated cartridge will clear the error condition

(see Exporting Cartridges

on page 26 ). If these symptoms occur on

multiple known good cartridges, consider cleaning the tape drive (see

Cleaning the Tape Drive

on page 30). If a particular cartridge causes error

conditions repeatedly, that cartridge may be defective or invalid.

Occasionally, you may see the message

In Transit, which indicates:

• An error condition has caused a cartridge to be left between its slot

and the drive. Power cycle or reset the ValueLoader to clear this

condition.

• A cartridge is unexpectedly found in the Import/Export slot opening.

Power cycle or reset the ValueLoader to clear this condition.

If the tape drive has a cartridge loaded, the top line displays

Drive loaded.

The cartridge currently loaded in the drive is indicated by an alternating

black block and the slot number as shown in figure 10

. This display can

also indicate that the specified cartridge is being loaded, unloaded,

imported, or exported, as well as indications of read to, write to,

calibrating, and so on. The ValueLoader status line indicates the current

operation. An example of this display is shown in figure 10

Figure 10 Operator’s

Panel—Drive Loaded

1 2 ... 30 31 32 33 34 35 36 37 38 39 40 ... 87 88

Keine Kommentare

Quantum ValueLoader Bedienungsanleitung Seite 35