Quantum ValueLoader Bedienungsanleitung PDF herunterladen (Seite 36)

Operating the ValueLoader

Operator’s Panel Overview

22 ValueLoader DLT VS80/DLT VS160 Tape Autoloader User Manual

LED Indicators 2 The Operator’s Panel includes four LED indicators that provide a variety

of information as detailed in table 2

Table 2 LEDs

LED Color Description

Ready/Activity Green Illuminated when power is on. Blinking whenever

there is tape drive or ValueLoader robotics

activity.

Clean Drive Amber Illuminated when the tape drive needs to be

cleaned. Indicates that 250 tape motion hours have

passed since the last cleaning. The LED turns off

when cleaning is successfully completed. (See

Cleaning the Tape Drive

on page 30.)

Media Attention Amber Illuminated if a media-related error has occurred.

This condition can be invalid format such as

DLT7000 or DLT8000, dirty read/write heads in

the tape drive, or if an invalid cartridge type

(DLTtapeIII III cartridge or non-DLT1 cleaning

cartridge) is inserted. The offending cartridge is

indicated by a “

!” in the cartridge inventory

display for the corresponding slot. Exporting the

indicated cartridge will clear the error condition

(see Exporting Cartridges

on page 26). If these

symptoms occur on multiple known good

cartridges, consider cleaning the tape drive (see

Cleaning the Tape Drive

on page 30). If a particular

cartridge causes these symptoms repeatedly, that

cartridge may be defective or invalid.

Error Red Illuminated if an unrecoverable tape drive or

ValueLoader error occurs. A corresponding error

message appears on the LCD screen (see

ValueLoader Error Codes

on page 56).

1 2 ... 31 32 33 34 35 36 37 38 39 40 41 ... 87 88

Keine Kommentare

Quantum ValueLoader Bedienungsanleitung Seite 36