Quantum GoVault Betriebsanweisung PDF herunterladen (Seite 22)

Chapter 2 Installation Procedures

Installing the Internal GoVault Dock

GoVault™ for Windows User’s Guide 10

2 Remove the cover from the workstation or server system.

3 Install the SATA card in an available PCI slot, and secure the card to

the computer using one screw (see figure 3

Figure 3 Installing the SATA

Card

Installing the Internal

GoVault Dock 2

After you have installed the SATA card, or if your computer workstation

or server system already has either a SATA-equipped motherboard or a

SATA-compliant host bus adapter PCI card, use the following procedure

to install the internal GoVault dock.

Note: See your computer manufacturer’s instructions for the

proper procedures to remove the cover.

Note: The standard configuration of the internal GoVault dock

includes side brackets and a 5.25-inch bezel for installation in a

5.25-inch drive bay. If you need to install the dock in a 3.5-inch

drive bay, use the procedure in appendix A

on page 62 to

remove the side brackets and change the bezel before

installing the internal GoVault dock.

PCI slot

SATA card

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 90 91

Keine Kommentare

Quantum GoVault Betriebsanweisung Seite 22