Quantum GoVault Betriebsanweisung PDF herunterladen (Seite 76)

Appendix A Changing the Bezel

Procedure

GoVault™ for Windows User’s Guide 64

Figure 36 Releasing the Bezel

Clips

4 Make sure that the bezel release is even across all surfaces, and

carefully remove the bezel in a straight, outward motion (see

figure 37

), and store it in a safe place.

Figure 37 Removing the 5.25-

inch Bezel

5 Set the chassis up-right, and carefully align all four clips of the 3.5-

inch bezel with the access holes.

6 Verify that cartridge manual eject button is aligned with the through-

hole on the bezel, and carefully push down on the bezel assembly

with slow, even pressure across all surfaces until the clips snap the

bezel into place (see figure 38

7 With the 3.5-inch bezel in place, you can now install the GoVault

dock in a 3.5-inch drive bay.

Caution: Do not force the bezel. It should slide off easily.

1 2 ... 71 72 73 74 75 76 77 78 79 80 81 ... 90 91

Keine Kommentare

Quantum GoVault Betriebsanweisung Seite 76