Quantum Scalar 100 Betriebsanweisung PDF herunterladen (Seite 26)

22 Installation

2 On your computer, double-click the HyperTerminal icon (Start> Program> Accessories>

Communications> HyperTerminal).

3 In the New Connection dialog box, enter SNC6101 for a name (any name will do) and click OK.

4 In the Connect To dialog box for the Connect using field, select the COM port your computer will be

using (COM1, for example) and click OK.

5 In the COM Properties dialog box, select these values:

6 Click OK.

To configure the SNC 6101

1 Power up the Scalar 100 and wait until the startup initialization process completes.

Within a few minutes, the RDY LED on the SNC 6101 will start flashing once per second and the Done

executing startup script message will appear on your service terminal.

2 At the service terminal, initialize the SNC 6101 by typing initializeBox.

Bits per second

19200

Data bits

Parity

None

Stop bits

Flow control

None

Emulation

ANSI

Note

Refer to your HyperTerminal documentation for any additional information

on how to configure and run HyperTerminal.

CAUTION

To ensure proper initialization of the SNC 6101, allow at least one

minute between a Scalar 100 power-down and subsequent power-up.

Note

SNC 6101 commands are case sensitive. Always enter capital and lower case

characters as indicated.

CAUTION

Use initializeBox only for a new or a replacement SNC 6101. This

command resets the fibre and SCSI channels, clears the device map

and the event log, and disables all enabled features.

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 51 52

Keine Kommentare

Quantum Scalar 100 Betriebsanweisung Seite 26