Quantum PX502 Betriebsanweisung PDF herunterladen (Seite 98)

Chapter 2 Basic Library Operations

OCP Components

Quantum PX500 Series User’s Guide 75

2 When you are finished viewing the cabinet setup information, press

Exit to return to the Setup screen.

Partitions Setup 2

To view or edit the partition information:

1 From the Setup screen, use the up and down arrows to highlight

Partitions and press Enter.

The Partitions Setup screen displays (see figure 50):

Stack role Select the stack role option to view or set the library

stack role (stand alone, master, or slave).

Left load port

Select the left load port options to enable/disable the

left load port and also to designate one column or the

entire magazine as a load port.

Right load port

Select the right load port options to enable/disable

the right load port and also to designate one column

or the entire magazine as a load port.

Drive FUP

from tape

Select the magazine or fixed that contains the

firmware update cartridge (FUP) and then the

specific tape drive to update. The library must be

offline to update the tape drive firmware.

Full Inventory When full inventory is on, the library will complete a

full inventory of the tape cartridges whenever a door

is opened. When full inventory is off and a load port

is accessed, the library will only inventory the load

port and not the entire library.

Cabinet Setup Description

1 2 ... 93 94 95 96 97 98 99 100 101 102 103 ... 293 294

Keine Kommentare

Quantum PX502 Betriebsanweisung Seite 98