Quantum TC-L53FN-AR Betriebsanweisung PDF herunterladen (Seite 22)

Chapter 2 Installation Procedures

Installing the Internal LTO-5 Tape Drive

8 LTO-5 Tape Drive User’s Guide

1 Visually inspect the shipping container and notify your carrier

immediately of any damage.

2 Place the shipping container on a flat, clean, stable surface and

carefully remove the contents.

3 Visually inspect the LTO-5 Tape Drive and notify your drive supplier’s

representative immediately of any damage.

4 Always save the shipping container and packing materials for any

future reshipment.

Installing the Internal LTO-5 Tape Drive

The installation of the internal LTO-5 tape drive differs depending on the

drive type: Half-Height or Full-Height. Refer to the following sections for

your drive type.

• Installing the Internal LTO-5 Half-Height Tape Drive

• Installing the Internal LTO-5 Full-Height Tape Drive

Installing the Internal

LTO-5 Half-Height Tape

Drive

To install the internal LTO-5 Half-Height Tape Drive, complete the

following procedures in the order presented:

1 Mounting the Internal Half-Height Tape Drive

on page 9

2 Connecting the Internal Half-Height Drive Interfaces

on page 11

3 Restarting the Internal Half-Height Tape Drive System

on page 12

4 Installing the LTO Driver Software

on page 19, if required

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 95 96

Keine Kommentare

Quantum TC-L53FN-AR Betriebsanweisung Seite 22