Quantum Scalar i500 Betriebsanweisung PDF herunterladen (Seite 401)

100

101

Chapter 12 Installing, Removing, and Replacing

Replacing the Control Module

Scalar i500 User’s Guide 382

7 If you placed the control module on top of an expansion module,

secure the two modules by tightening the two thumbscrews at the

base of the front of the module and the two thumbscrews located at

the base of the back of the module. Then lower the module’s guide pin

(located at the base of the front of the module) by turning it and

pushing it down.

8 Stack all expansion modules (if any) in their original positions above

the control module. Use rack ears to fasten the modules to the

rack.Then tighten all thumbscrews located at the base of the front and

back of the modules.

9 Engage the Y-rails. Tighten the thumbscrews and lower the guide

pin. Doing this aligns the Y-rail with the Y-rail of the module beneath

it.

a From the front of the library, open the I/E station and access

doors of the control module. Squeeze the handle of the Y-rail

release mechanism, lift it out of its locked position, and slide it

downward as far as it will go.

1 2 ... 396 397 398 399 400 401 402 403 404 405 406 ... 569 570

Kommentare zu diesen Handbüchern

Keine Kommentare

Quantum Scalar i500 Betriebsanweisung Seite 401

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Nein Quantum Scalar i500