Quantum 1200 Series DAT Autochanger Bedienungsanleitung PDF herunterladen (Seite 119)

Unloading a Data Cartridge

SDLT 600 Product Manual 103

Unloading a Data Cartridge 1

Follow these steps to unload a data cartridge; see figure 27 as needed.

1 Press the

Eject button (or issue an appropriate system software

command); the tape drive completes any active writing of data to the

media, then rewinds. The Drive Status LED flashes as the media

rewinds.

When the media is finished rewinding, the tape drive ejects the data

cartridge and the Drive Status LED lights steadily.

2 Remove the data cartridge from the tape drive and return the data

cartridge to its plastic case to protect it from damage.

Caution: Remove the data cartridge from the tape drive BEFORE

turning off host power. Failure to remove a data cartridge may

result in data cartridge or tape drive damage.

Do NOT rush removal of the data cartridge. Wait until the

tape drive ejects the data cartridge and the Drive Status LED

lights steady before removing the data cartridge.

1 2 ... 114 115 116 117 118 119 120 121 122 123 124 ... 141 142

Keine Kommentare

Quantum 1200 Series DAT Autochanger Bedienungsanleitung Seite 119