Quantum 1200 Series DAT Autochanger Bedienungsanleitung PDF herunterladen (Seite 128)

Data Cartridge Write-Protect Switch

SDLT 600 Product Manual 112

Data Cartridge Write-Protect Switch 2

Each data cartridge has a write-protect switch that you can use to prevent

accidental erasure of data. Before inserting the data cartridge into the tape

drive, position the write-protect switch on the front of the data cartridge

(figure 34

) according to the type of operations you expect to perform.

Since the DLTtape VS1 data cartridge is a read-only data cartridge when

used in the SDLT 600 tape drive, the write-protect switch (in this

configuration) does not apply.

Figure 34 Write-Protect

Switch on DLTtape VS1 Data

Cartridge

• Slide the write-protect switch to the left to enable write protection

(you can read existing data; however, you cannot write over existing

data on the media, nor append additional data to the media). When

Padlock “closed”

Write-protect

Slide RIGHT to disable

write-protection

Slide LEFT to enable

indicating

Switch

write-protection On

Padlock “open”

indicating

write-protection Off

1 2 ... 123 124 125 126 127 128 129 130 131 132 133 ... 141 142

Keine Kommentare

Quantum 1200 Series DAT Autochanger Bedienungsanleitung Seite 128