Quantum DLT 4000 Handbuch PDF herunterladen (Seite 157)

SCSI Commands

Quantum DLT 4000 Tape Drive 5-57

LOG SENSE Command (4Dh) (continued)

Table 5–28 Log Parameters for Device Wellness LOG SENSE Page Field Descriptions

Field Name Description

Parameter

Code

Parameter Codes 0000h through 000Fh are supported. This provides 16 log entries for

error information capture.

DU Disable Update. Always 0.

DS Disable Save. Not supported. This bit always set to 1.

TSD Target Save Disable. Not supported. This bit always set to 0.

ETC Enable Threshold Comparison. Threshold checking is not supported on this page.

Always set to 0.

TMC Threshold Met Criteria. Always 0.

LP List Parameter. Always set to 0.

Time

Stamp

Power-on hours when CHECK CONDITION occurred (note that this is the number of

power-on hours of the total number of hours during the lifetime of the drive).

Media ID Internal media identifier being used when CHECK CONDITION occurred. 0 = no media

or unknown media when event occurred. Note that this is not an applicable means of

tracing media.

1 2 ... 152 153 154 155 156 157 158 159 160 161 162 ... 299 300

Keine Kommentare

Quantum DLT 4000 Handbuch Seite 157