Quantum DLT 4000 Handbuch PDF herunterladen (Seite 41)

100

101

Hardware Implementation

Quantum DLT 4000 Tape Drive 2-7

2.2.3 Configure The Rackmount Drive for Parity Checking

The default setting for DLT 4000 tape drives is to have parity checking enabled.

If the system to which you are configuring the rackmount tape drive does not

generate SCSI parity, there are two ways that parity checking can be disabled.

You can disable parity checking by:

(a) Installing a jumper across Pins 1 and 2 on the parity check connector as

shown in Figure 2-2, or

(b) Installing a jumper across Pins 7 and 8 on the SCSI ID jumper block shown

in Figure 2-1.

2.2.4 Configure the Tabletop Drive

Figures 2-3 and 2-4 show the locations of the controls for the tabletop versions of

the drive. Note that these drives are normally configured to meet customer

specifications before they leave the factory so should not require any internal

configuration changes on-site.

Figure 2–3 Tabletop (Version 1) Back Panel Controls

SCSI ID Pushbutton

1 2 ... 36 37 38 39 40 41 42 43 44 45 46 ... 299 300

Kommentare zu diesen Handbüchern

Keine Kommentare

Quantum DLT 4000 Handbuch Seite 41

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Bandlaufwerke Quantum DLT 4000