Quantum L500 Betriebsanweisung PDF herunterladen (Seite 33)

Chapter 2 Installing the L500 Series Library

Selecting an Installation Location

Quantum|ATL PowerStor L500 Series Tape Library User’s Guide 17

Overhead

Clearance

The height of the stand-alone library is 18 inches (46 cm). The

height of the rack mount library is 7 inches (18 cm).

To remove and replace the library enclosure, you need an overhead

clearance slightly greater than the height of the library.

Surface Strength

and Inclination

Place the library and rack on a clean, level surface. If the library

will be placed on a desk or table, make sure it is sturdy enough to

support the library’s weight (76 lbs/35 kg).

Power and

Grounding

The electrical ratings for the library are 110 - 120/200 - 240 VAC,

50 Hz - 60 Hz, 1.6 A - 0.8 A, 140 W - 200 W.

Power Cord

A 110/120 VAC power cord is supplied with your unit. If your

country/locale does not use 110/120 VAC, refer to the criteria

listed below for parameters.

The power cord used with this equipment must meet the following

criteria:

• The power cord should be a minimum of 18/3 AWG, 60

°C,

Type SJT or SVT.

• UL and CSA Certified cordage rated for use at 250 VAC with a

current rating that is at least 125% of the current rating of the

product. In Europe, the cordage must have the HAR mark.

• The plug must be terminated in a grounding-type male plug

designed for use in your country. It must also have marks

showing certification by an agency acceptable in the country.

Warning:

Do not attempt to modify or use an external 110 - 120

VAC power cord for 220 - 240 VAC input power.

Modifying the power cord can cause personal injury

and severe equipment damage.

1 2 ... 28 29 30 31 32 33 34 35 36 37 38 ... 119 120

Keine Kommentare

Quantum L500 Betriebsanweisung Seite 33