Quantum L500 Betriebsanweisung PDF herunterladen (Seite 41)

Chapter 2 Installing the L500 Series Library

Configuring the Tape Library

Quantum|ATL PowerStor L500 Series Tape Library User’s Guide 25

Configuring the Tape Library

This section describes how to configure the library. Configuration

consists of verifying SCSI ID settings for the library and all drives.

Figure 19

shows the location of the OCP on the front panel of the

tape library. Verify all SCSI IDs using the OCP. If necessary, change

the IDs (see Changing SCSI ID Settings

Figure 19 Front Panel

(rack mount)

The system uses SCSI IDs to identify or address devices, such as

the library card and the tape drives, on the SCSI bus.If the library is

one of multiple SCSI devices on the bus, use a SCSI ID that is

unique from any other device or system ID on the SCSI bus.

Table 2

lists the default SCSI IDs. Figure 17 on page 22 shows

physical SCSI device locations.

LCD

PREVIOUS SELECT

ENTERNEXT

OCP

Magazine 0 Door

(Slots 0 - 6

)

Magazine 1 Door

(Slots 7 - 13

)

1 2 ... 36 37 38 39 40 41 42 43 44 45 46 ... 119 120

Keine Kommentare

Quantum L500 Betriebsanweisung Seite 41