Quantum DLT 2500 Wartungshandbuch PDF herunterladen (Seite 81)

Stacker Operation

Selecting and Loading a Cartridge

After the stacker initializes successfully, it automatically selects the ﬁrst slot containing a

cartridge. The select button becomes active.

To select a cartridge, press the Select button to advance to the next slot containing a

cartridge.

To load a cartridge from the magazine into the drive, press the Load/Unload button.

Table 5-5 summarizes the actions that follow.

To unload a cartridge, make sure tape operations are halted and press the Load/Unload

button.

Caution: If you press the Load/Unload button before backup or other tape operations are

stopped on the host, the operation could fail and the drive could become unavailable.

Table 5-6 summarizes the actions that follow.

If the ERR LDR message displays, press the Load/Unload button to reset the stacker.

Table 5-5 Loading a Cartridge

Display Action

LDR ACT The stacker’s elevator moves to the slot you selected.

LDR ACT The cartridge is removed from the magazine and placed into the elevator.

LDR ACT The elevator moves to the drive position.

DRV ACT The elevator inserts the cartridge into the drive.

DRV RDY The cartridge is fully loaded and at its beginning (BOT).

Table 5-6 Unloading a Cartridge

Display Action

DRV REW Pressing load/unload rewinds the tape, returning it to BOT.

DLR ACT The cartridge unloads from the drive.

LDR RDY The cartridge is returned to its slot in the magazine.

1 2 ... 76 77 78 79 80 81 82 83 84 85 86 ... 113 114

Keine Kommentare

Quantum DLT 2500 Wartungshandbuch Seite 81