Quantum DLT VS160 Bedienungsanleitung PDF herunterladen (Seite 29)

Installing the ValueLoader

Preparing the Host and Verifying the Connection

Quantum ATL ValueLoader DLT VS80/DLT VS160 Tape Autoloader User Manual 15

• Use proper procedures to prevent electrostatic discharge

(ESD). Use wrist-grounding straps and anti-static mats when

handling internal components.

• Make sure that the host server has an open expansion slot.

• Make sure your backup application supports the SCSI host

adapter.

• Depending on the server configuration, you may need to

change the SCSI ID of the ValueLoader. See Changing the SCSI

ID on page 40 for more information.

• Ensure the ValueLoader is properly terminated. If the

ValueLoader is the only SCSI device (other than the SCSI host

adapter) on the SCSI bus, it must be terminated. Likewise, if

the ValueLoader is physically the last SCSI device on the SCSI

bus, it must be terminated. Only the devices physically at the

beginning and end of the SCSI bus should be terminated.

• Verify the connection between the ValueLoader and host by

making sure the host server’s operating system recognizes the

ValueLoader. To do this:

• For Microsoft

Windows NT

, select Settings > Control

Panel > SCSI Adapter

• For Windows

2000, select Settings > Control Panel >

System > Hardware > Device Manager > Tape Drive

(and/or

Media Changer)

For more information on verifying the connection of SCSI

devices, consult the operating system documentation.

1 2 ... 24 25 26 27 28 29 30 31 32 33 34 ... 89 90

Keine Kommentare

Quantum DLT VS160 Bedienungsanleitung Seite 29